World’s lightest and thinnest circuits pave the way for ‘imperceptible electronics’

World's lightest and thinnest circuits pave the way for 'imperceptible electronics'

 

 

Researchers from Asia and Europe have developed the world’s lightest and thinnest organic circuits, which in the future could be used in a range of healthcare applications.

Lighter than a feather, these ultrathin film-like organic transistor integrated circuits are being developed by a research group led by Professor Takao Someya and Associate Professor Tsuyoshi Sekitani of the University of Tokyo, who run an Exploratory Research for Advanced Technology (ERATO) program sponsored by the Japan Science and Technology Agency (JST), in collaboration with Siegfried Bauer’s group at the Johannes Kepler University (JKU) Linz, Austria.

The circuits are extremely lightweight, flexible, durable and thin, and conform to any surface. They are just 2 microns thick, just 1/5 that of kitchen wrap, and weighing only 3g/m^2, are 30 times lighter than office paper. They also feature a bend radius of 5 microns, meaning they can be scrunched up into a ball, without breaking. Due to these properties the researchers have dubbed them “imperceptible electronics”, which can be placed on any surface and even worn without restricting the users movement.

The integrated circuits are manufactured on rolls of one micron thick plastic film, making them easily scalable and cheap to produce. And if the circuit is placed on a rubber surface it becomes stretchable, able to withstand up to 233% tensile strain, while retaining full functionality.

“This is a very convenient way of making electronics stretchable because you can fabricate high performance devices in a flat state and then just transfer them over to a stretchable substrate and create something that is very compliant and stretchable just by a simple pick and place process.”

This prototype device is a touch sensor featuring a 12×12 array of sensors on a 4.8 cm x 4.8 cm circuit. It is made up of two layers, an integrated circuit layer and a tactile sensor layer.

With the development of these plastic electronics, the possibility for flexible, thin, large area electronics has been realized. In the future, the group would like to expand the capabilities of these circuits.

“The new flexible touch sensor is the world’s thinnest, lightest and people cannot feel the existence of this device. I believe this development will open up a wide range of new applications, from health monitoring systems, wearable medical instruments, and even robotic skins in the future.”

The results of this research were published in the July 25, 2013 issue of the journal Nature.

This content is provided by DigInfo.tv, AkihabaraNews Official Partner.

Via: University of Tokyo

 

 

Source: 

Related Articles

Wacom releases new lineup of Intuos and Intuos Pro pen tablets

 

Wacom has released a new lineup of its Intuos series of pen tablets.

Starting with this new range of products, Wacom is also unifying its brands. The new products will be available in two versions: A professional range, the Intuos Pro, with 2,048 levels of pen pressure and angle sensitivity, and an entry-level range, the Intuous, with 1,024 sensitivity levels.

 

The Igarashi Lab. at the University of Tokyo is developing a new type of physics engine which can faithfully recreate in 3D the stylizations common to 2D anime.

"Physics engines are used in 3D animation, to generate the motions of hair and clothes. They can do physically correct computing, but the problem is, that's all they can do. The engine we've created makes it possible for artists to adjust such physics computations, in other words, to deform things."

 

SEL have developed a range of flexible OLED displays and high PPI LCD panels which use CAAC oxide semiconductors.

"CAAC stands for C-Axis Aligned Crystal. In this material's structure, the crystals are aligned in the c-axis direction. Because CAAC itself is crystalline instead of amorphous, it has much higher reliability. Until now, with oxide semiconductors, reliability was generally thought to be a problem, but using this material solves that problem."

Akihabaranews.com - Diginfo - Kosmek robotic hand changer

KOSMEK has developed a robotic hand changer that can switch between robot tools automatically - and with high precision. 

Keystone Technology's LED vegetable garden system is a cultivation system for indoor plant factories which uses LED lighting instead of sunlight. The most defining feature of the system on display at the company's showroom in Yokohama is its 3-dimensional use of space.

 

At the University of Tokyo, the Hirose-Tanikawa Lab is doing R&D on a system that virtually creates and affects people's emotional states.

 

This mixed reality interface places virtual characters in the real world. It was developed by the Naemura Lab at the University of Tokyo.

Users can have an animated character jump onto their hand, as well as guide the character onto blocks, creating a novel interactive experience.

"Recently, devices have been developed that can form images in mid-air. We've utilized one of those, and combined it with sensors and a projector, to provide an intuitive display experience where a picture in the air is skillfully merged with the real world."

 

This AquaTop display is a touchscreen display for your bath.

The display is projected onto a bath filled with water mixed with bath salts, and a Kinect is used to detect interaction. It can recognise individual fingers sticking out to of the bath by 1.4 cm or more as well as interactions from above the surface of the water. It is being developed by the Koike Lab. at the University of Electro-Communications.

Fujitsu boosts security for multi-service palm-vein authentication system

Fujitsu Laboratories has developed a new identification technology, which enables palm-vein identification to be used securely in a wider range of situations.

Conventional palm-vein identification works by comparing complex vein patterns extracted from images of the user's palm. By contrast, Fujitsu's new technology extracts characteristic components from the vein patterns, and uses them to generate 2,048-bit reference codes which are used for comparison.

Reno J. Tibke - November 02, 2013

JTFF - Japanese Technology from the Future Friday! - AkihabaraNews.com

This week it’s wrapping displays that just keep going around the edge of your phone, and a Japanese man, Takaaki Sasaki, the first in line at Tokyo’s Ginza Apple store, was all weepy today when he got the new iPad Air - but it’s not the usual creepily overenthusiastic fandorkboyism, it’s actually kind of touching.

• • •

 

The Hairlytop Interface is an interactive surface display made of soft solid-state actuators and optical sensors which react to light. Jointly developed by the University of Electro-Communications and Symphodia Phil, when placed on an iPad that is playing a video, it moves organically, like a living thing, in response to changes in the brightness of the screen.

"One feature of this system is that the motion is very cute, like that of an animal. Another feature is that it can be used extremely freely in terms of design."

Low-cost Endoscope That Does Not Use Optical Fiber

ARS develops, designs and manufactures medical endoscopes at a reduced cost. Eyeing demand for low-cost endoscopes in emerging economies, ARS began by selling its products in India in December 2012, and ahead it aims to roll out mass-market models in Southeast Asian and South Asian markets.

Pages