Nakabayashi - 3D printing pen "3Doodler" from Wobbles Works

Nakabayashi, Japanese corporation offering stationery-related products, announced that they obtained exclusive distribution rights in Japan to sell the 3D printing pen 3Doodler that the American company Wobbles Works has developed.

With 3Doodler, you can create a piece of 3D art by writing characters or drawing in the air.  Once you set the dedicated plastic filament made with PLA resin or ABS resin in the pen unit and turn on the power, the melted resin is pushed out of the pen and gets cooled and solidified. The pen tip becomes a maximum of 240 degrees.

There is no need for any 3D data or special software when you create a 3D art piece with 3Doodler. It comes with 50 plastic filaments (25 PLA and 25 ABS).

 

 

To read our previous articles about 3D printing, please click here.

  • Price: ¥16,000
  • Extra plastic filament: ¥1,500 each
  • Size: 37mm in diameter x 187mm in length
  • Weight: 130g
Source: 

Related Articles

Japanese Technology from the Future SATURDAY...kinda. - AkihabaraNews.com

This week nothing very interesting happened on Friday night. And then on Saturday night - which is now - nothing very interesting happened again. Except for gas-propelled cream splat face prank and, oh yeah, this Japanese company 3D-printed a working model of a jet engine. So there's those things that happened.

3D Printing with Metal - AkihabaraNews.com

Japan was all over the infancy of 3D printing, but in decades since, J-R&D has kinda missed the boat.

OPENCUBE SCOOVO C170 Launch

Way back when, the term “additive manufacturing” described a process little known outside of that industry, and Japan was actually on the forefront of that tech.

Reno J. Tibke - February 01, 2014

JTFF - Japanese Technology from the Future Friday! - AkihabaraNews.com

This week Sony’s purchasing part of Nintendo’s supply chain (a factory that makes things with 4-letter acronyms), a Japanese artist teamed up with Nike to make artistic HyperColor spandex (deep cut!), and Honda’s giving away 3D modeling data for their concept cars - print your own!

• • •

Hong Kong's 3D printer producer, Makible, signed a distributor agreement with Asianet and opened an online store called MakiBox Japan for the Japanese market. They are going to start selling 3D printer construction kits at reasonable prices on February 20:

- MakiBox A6 LT for ¥34,800
- MakiBox A6 HT for ¥46,800

MakiBox A6 is a semi-assembled 3D printer kit series with simple assembly requiring you to screw and clamp some components together and tune a bit.

Bonsai Lab, Inc. has released the reasonably-priced compact 3D printer BS01 on April 1.

In December, 2013, 3D printer BS01 was sold for 3 weeks only at the cloud funding site "kibidango". It collected the targeted amount of money after just 2 days, and reached about ¥10,500,000 funding in 3 weeks, an amount about 5 times more than their targeted amount.

No Guns Allowed in Japan - AkihabaraNews.com

Is it Really a Gun? Just a Complicated Weapon? Whatever the Case, Yoshitomo Imura is Incarcerated

XYZprinting Japan is going to start selling the personal 3D printer da Vinci 1.0 3D Printer for ¥69,800 on March 18 in Japan.

XYZprinting is a Taiwanese company. They promote a reasonable price, and although Japanese tax will be increased to 8% on April 1, they will keep the price ¥69,800 including tax after that date.

There is no complicated initial setting required for da Vinci 1.0 3D Printer. As soon as you set the filament, you are able to start using it.

Mutoh Engineering is currently holding a printing service event where you can make your own 3D figure dolls at Tokyo Solamachi, a shopping mall at Tokyo Skytree.

This is a collaborated event with Digitizer, a French scanner manufacture. It's open from 10 A.M. to 9 P.M every day until June 11.

Mariage Poupée for the most important day of your lives.

Morisaki Jushi co. Ltd., a resin processing company from Kyoto prefecture in Japan, recently started offering a new service called MARIAGE POUPÉE. They create original wedding dolls with a 3D printer and 3D scanner.

Reno J. Tibke - July 12, 2014

JTFF - Japanese Technology from the Future Friday! - AkihabaraNews.com

This week we've learned that Japan's formed a body to (very softly) police/advise on cryptocurrencies like BitCoin, Japan's 3D printing industry showing more and more life signs, and a relatively unknown powered exoskeleton maker is seeing some pretty cool progress! 

• • •

Another Non-Japaneses Manufacturer Enters the Japanese Market
Brulé
today started reselling 3D printer "Ultimaker2" in Japan, manufactured by a Dutch 3D printer company. It is now available for ¥349,800 yen on Brulé's official site.

The printable area range of Ultimaker2 is up to 230×225×205mm. The minimum built-up pitch is 0.02mm. As an FDM or FFF printer, it is one of the 3D printers that has the highest accuracy.

3D printer plays a key role in development of Privacy Visor

The National Institute of Informatics (NII) and Maezawa Mold have been co-developing a wearable device, the Privacy Visor, to protect users' privacy from SNS facial recognition.

The Privacy Visor is a Google Glass-style device that uses LEDs. By illuminating a user's face with invisible light, it can prevent privacy invasion through surveillance camera-based face recognition systems.