A world first! Success at complete quantum teleportation

A world first! Success at complete quantum teleportation


Furusawa group at the University of Tokyo has succeeded in demonstrating complete quantum teleportation of photonic quantum bits by a hybrid technique for the first time worldwide. In 1997, quantum teleportation of photonic quantum bits was achieved by a research team at Innsbruck University in Austria. However, such quantum teleportation couldn't be used for information processing, because measurement was required after transport, and the transport efficiency was low. So, quantum teleportation was still a long way from practical use in quantum communication and quantum computing. The demonstration of quantum teleportation of photonic quantum bits by Furusawa group shows that transport efficiency can be over 100 times higher than before. Also, because no measurement is needed after transport, this result constitutes a major advance toward quantum information processing technology.

"In 1997, quantum bit teleportation was successfully achieved, but as I said just now, it was only achieved in a probabilistic sense. In 1998, we used a slightly different method to succeed at unconditional, complete teleportation. But at that time, the state sent wasn't a quantum bit, but something different. Now, we've used our experimental technology, which was successful in 1998, to achieve teleportation with quantum bits. The title of our paper is "Hybrid Technique," and developing that technique is where we've been successful."

The hybrid technique was developed by combining technology for transporting light waves with a broad frequency range, and technology for reducing the frequency range of photonic quantum bits. This has made it possible to incorporate photonic quantum bit information into light waves without disruption by noise. This research result has been published in Nature, and is attracting attention worldwide, as a step toward quantum information processing technology.

"I think we can definitely say that quantum computers have come closer to reality. Teleportation can be thought of as a quantum gate where input and output are the same. So, it's known that, if we improve this a little, the input and output could be produced in different forms. If changing the form of input and output like that is considered as a program, you have a programmable quantum gate. So, I think a quantum computer could be achieved by combining lots of those."

Looking ahead, Furusawa group aims to increase the transport efficiency and make the device smaller by using photonic chips. In this way, the researchers plan to achieve further advances toward quantum computing.



Related Articles

Wacom releases new lineup of Intuos and Intuos Pro pen tablets


Wacom has released a new lineup of its Intuos series of pen tablets.

Starting with this new range of products, Wacom is also unifying its brands. The new products will be available in two versions: A professional range, the Intuos Pro, with 2,048 levels of pen pressure and angle sensitivity, and an entry-level range, the Intuous, with 1,024 sensitivity levels.


The Igarashi Lab. at the University of Tokyo is developing a new type of physics engine which can faithfully recreate in 3D the stylizations common to 2D anime.

"Physics engines are used in 3D animation, to generate the motions of hair and clothes. They can do physically correct computing, but the problem is, that's all they can do. The engine we've created makes it possible for artists to adjust such physics computations, in other words, to deform things."

World's lightest and thinnest circuits pave the way for 'imperceptible electronics'



Researchers from Asia and Europe have developed the world’s lightest and thinnest organic circuits, which in the future could be used in a range of healthcare applications.

Fujitsu boosts security for multi-service palm-vein authentication system

Fujitsu Laboratories has developed a new identification technology, which enables palm-vein identification to be used securely in a wider range of situations.

Conventional palm-vein identification works by comparing complex vein patterns extracted from images of the user's palm. By contrast, Fujitsu's new technology extracts characteristic components from the vein patterns, and uses them to generate 2,048-bit reference codes which are used for comparison.


At the University of Tokyo, the Hirose-Tanikawa Lab is doing R&D on a system that virtually creates and affects people's emotional states.


SEL have developed a range of flexible OLED displays and high PPI LCD panels which use CAAC oxide semiconductors.

"CAAC stands for C-Axis Aligned Crystal. In this material's structure, the crystals are aligned in the c-axis direction. Because CAAC itself is crystalline instead of amorphous, it has much higher reliability. Until now, with oxide semiconductors, reliability was generally thought to be a problem, but using this material solves that problem."


This mixed reality interface places virtual characters in the real world. It was developed by the Naemura Lab at the University of Tokyo.

Users can have an animated character jump onto their hand, as well as guide the character onto blocks, creating a novel interactive experience.

"Recently, devices have been developed that can form images in mid-air. We've utilized one of those, and combined it with sensors and a projector, to provide an intuitive display experience where a picture in the air is skillfully merged with the real world."

Keystone Technology's LED vegetable garden system is a cultivation system for indoor plant factories which uses LED lighting instead of sunlight. The most defining feature of the system on display at the company's showroom in Yokohama is its 3-dimensional use of space.

Akihabaranews.com - Diginfo - Kosmek robotic hand changer

KOSMEK has developed a robotic hand changer that can switch between robot tools automatically - and with high precision. 


This AquaTop display is a touchscreen display for your bath.

The display is projected onto a bath filled with water mixed with bath salts, and a Kinect is used to detect interaction. It can recognise individual fingers sticking out to of the bath by 1.4 cm or more as well as interactions from above the surface of the water. It is being developed by the Koike Lab. at the University of Electro-Communications.


The Hairlytop Interface is an interactive surface display made of soft solid-state actuators and optical sensors which react to light. Jointly developed by the University of Electro-Communications and Symphodia Phil, when placed on an iPad that is playing a video, it moves organically, like a living thing, in response to changes in the brightness of the screen.

"One feature of this system is that the motion is very cute, like that of an animal. Another feature is that it can be used extremely freely in terms of design."

Low-cost Endoscope That Does Not Use Optical Fiber

ARS develops, designs and manufactures medical endoscopes at a reduced cost. Eyeing demand for low-cost endoscopes in emerging economies, ARS began by selling its products in India in December 2012, and ahead it aims to roll out mass-market models in Southeast Asian and South Asian markets.

Reno J. Tibke - November 02, 2013

JTFF - Japanese Technology from the Future Friday! - AkihabaraNews.com

This week it’s wrapping displays that just keep going around the edge of your phone, and a Japanese man, Takaaki Sasaki, the first in line at Tokyo’s Ginza Apple store, was all weepy today when he got the new iPad Air - but it’s not the usual creepily overenthusiastic fandorkboyism, it’s actually kind of touching.

• • •